There are lots of cute solar lights and lanterns made out of all sorts of material for the summer, but have you thought about making one out of paper mache? Nothing like your very own handcrafted paper mache lantern!
Material for an Outdoor Lantern:
- Plastic cup/bowls/masking tape/paint brush
- Paper mache glue and or outdoor mod podge
- Acrylic paint
- Xacto knife
- Design pattern
- Texture Stone spray paint
- Solar lights (dollar store) or led candles
Mix paper mache glue:
1 part flour
2 part water
pinch of salt and stir well
Step 1 Tear newspaper into small strips
Step 2 Blow up balloon to desired lantern size. For the openings, use a small bowl as a template and place on the round bottom portion of balloon and draw around edge using a black marker. Do the same on the closed end with a smaller bowl. Next, attach a large plastic cup using masking tape to support the balloon and to hold while applying the strips.
Step 3 Coat a small section at a time with glue and using a paint brush to pick up and attach the strips, brushing the glue on top of the paper(less messier than using your hands). *Lay all strips in the same direction for each layer, alternating direction or color of paper.
Step 4 Glue on at least 5 or 6 layers between the black marked areas.
Step 5 Once your last layer of paper strips is applied, coat the final layer with glue to seal (I used outdoor mod podge). Allow to dry completely. I let mine dry 3 days because of rainy weather.
By the time the paper mache drys, the balloon probably has shrunk. Not to worry, the form keeps its' shape.
Step 6 Pop the balloon and remove the remnants.
Step 7 Trim the edges to make them even.
Step 8 Overlap the edges of the openings with additional strips of paper and glue and let dry.
Step 9 Paint the entire lantern with white primer and allow to dry.
Step 10 Use a stencil or pattern that you created to make a decorative design for your lantern. I used a 5 petal flower pattern that I had folded and cut out.
Step 11 Draw the pattern on heavy duty paper or cardboard and cut out using a xacto knife. Position on lantern with masking tape and trace. Carefully cut out pattern with an xacto knife. Seal the cutout edges with glue and let dry.
Step 12 Spray with textured stone paint and follow directions for usage, sealing and dry time. Textured stone paint is amazing and gives an actual "stone" finish.
Place the top of solar lights (remove stick base) or led candle/lights into the base and . . .
light up that area or decorate!
Take a little time to enjoy